Brand: Poynting
Product Code: XPOL-2
Availability: In Stock

NOTE: You need to login first to see product price.

Ignore this note, If already logged in.

Operating Frequency: 698 - 2700 MHz

Not a reseller? You can buy this item for retail on this page.

4G LTE External Antenna Setup Overview

9 dBi - Cross Polarized High-Gain LTE Outdoor Panel Antenna - XPOL-2

The XPOL-2 is a 9dBi model, in a cross polarized configuration. It is designed for outdoor application to improve reception for 4G/LTE and 3G signals. It's a future-proof MIMO Antenna that can support LTE and it is backward compatible with 3G and 2G technologies. This model actually has dual-antenna inside, it is cross polarized and contained in one enclosure for optimal performance and should be best for 4G/LTE application for any network operator in Ireland, UK, and Europe.

For the 4dBi version of this model, checkout XPOL-1 Model.

This wall or pole mountable aerial incorporates two separately fed ultra wideband elements in a single housing, this specific model is equipped to provide client-side MIMO and diversity support for todays network and future. Two SMA cables (bound into one) should be used with this antenna, and can be perfectly used with the Huawei B593 or Speedport II Modem/Router. Very ideal as a CPE (Customer Premise Equipment), since it supports the following bands; LTE (AKA 4G), 3G, HSDPA, EDGE and GPRS. This aerial can be used with cellular modems, low-cost routers and cellular customer premise equipment.

The XPOL-2 should enhance your signal reception and increase connection stability. It is one of the most recommended device to enhance signal reception, in various Irish, UK and Soutn African broadband Forum Sites. It is known to work well with the Huawei B593 Series, as well as the B315s Series of 4G/LTE Modems.

The The XPOL-2 model should be automatically detected using those above mentioned Huawei Models, along with other known brands with auto detection feature. It should be detected as two external antennas when looking at the Admin Dashboard.

Please refer to the image below.

XPOL-2 detected as two external antennas

You should be able to use this wideband antenna with the following Irish Network Operators:

  • Three
  • O2
  • Vodafone (Formerly Ericell)
  • Meteor
  • Tesco Mobile
  • eMobile

Why Choose Poynting XPOL-2 LTE External Antenna?

  • You get what you pay for
  • 5-7 meter cables included with some products (directional antennas, not omnis)
  • High-quality, low-loss coaxial cable used
  • DC-short built into their products (forces antenna detection and also helps with vicinity lightning strikes)

Features

  • High gain directional antenna
  • Broadband covering multiple operational frequencies (698 - 2700MHz)
  • Wall or pole mountable
  • Lightweight
  • Waterproof
  • Two antennas (cross polarized) in one enclosure

Application Areas

  • Urban and rural areas
  • Poor data signal reception (indoor or outdoor)
  • Slow data transmission connection areas
  • Unstable connection
  • Increase system transmission reliability
  • LTE fringe areas (close to an LTE area, but just out of reach)
  • Network operator flexibility - as the antenna is wide band, a new antenna is not needed per network operator, thus, it should work on most networks.

Works With Known Router Brands

The Xpol-2 improves signal quality and speed significantly and can be used with the following known LTE Router Brands:

  • Huawei B315
  • Huawei B525
  • TP-LINK MR6400
  • TP-LINK MR200

Uses

Since this antenna can cover a wide-band of frequencies, you should be able to use it in the following applications; 3G, 4G, GSM, Fixed Outdoor Antennas, Industrial Wi-Fi, LTE, LTE & GSM, MIMO.

You can use this model as 4G/LTE Signal Booster Aerial to enhance your signal reception. You can perfectly attach it to a Speedport II, Huawei B315 Modem or the TP-Link MR6400 as 4G/LTE external antenna. Take note that you should be receiving 1-2 signal bar (without the aerial) at your current location in order for the XPOL antenna do its job. It can't boost your signal if there's none in the first place. Use your Router's Admin Dashboard to check signal strength.

Additional information

Gain (Max) 9 dBi Max Gain
Polarisation 0° and 90°
Feed Power Handling 10 W
Nominal Input Impedance 50 Ohm (nominal)
Dimensions (l x w x d) 255 x 255 x 80 mm (without bracket)
Mounting Wall or pole mount
Weight 1,55 kg
Mounting Bracket up to 60mm poles
Connector 2 x SMA male
Cable Loss 0.35 dB/m
Material ABS (halogen free)
Color Pantone – Cool Gray (1C)
RAL 7047
Flammability Rating UL 94-V0
Environmental Conditions Outdoor/Indoor
Operating Temperature -40 to +70°C
RoHS Compliant
VSWR < 2.5:1
Water Ingress Rating IP 65 (NEMA 4X)

Downloads

Where To Buy XPOL-2 4G/LTE External Antenna

You can order this 4G Outdoor Antenna online using "add to cart" button. Then go to checkout page and process your order. You can pay using your Credit Card via our secure page. Your payment shall be handled via Stripe Payment Gateway.

You can also drop-by and buy from our physical store located at 24 Main St, Buttevant, Co. Cork, Ireland

Or call us to order - +353 22 23440

Write a review

Please login or register to review
Slider